Jumat, 14 April 2017



   CLASIFICATION OF MATTER 
     

       Matter is defined as anything that occupies space and has mass, and it is all around us. Solids and liquids are more obviously matter: We can see that they take up space, and their weight tells us that they have mass. Gases are also matter; if gases did not take up space, a balloon would stay collapsed rather than inflate when filled with gas.
Solids, liquids, and gases are the three states of matter commonly found on earth A solid is rigid and possesses a definite shape. A liquid flows and takes the shape of a container, except that it forms a flat or slightly curved upper surface when acted upon by gravity. (In zero gravity, liquids assume a spherical shape.) Both liquid and solid samples have volumes that are very nearly independent of pressure. A gas takes both the shape and volume of its container.
 
 

Some samples of matter appear to have properties of solids, liquids, and/or gases at the same time. This can occur when the sample is composed of many small pieces. For example, we can pour sand as if it were a liquid because it is composed of many small grains of solid sand. Matter can also have properties of more than one state when it is a mixture, such as with clouds. Clouds appear to behave somewhat like gases, but they are actually mixtures of air (gas) and tiny particles of water (liquid or solid).
The mass of an object is a measure of the amount of matter in it. One way to measure an object’s mass is to measure the force it takes to accelerate the object. It takes much more force to accelerate a car than a bicycle because the car has much more mass. A more common way to determine the mass of an object is to use a balance to compare its mass with a standard mass.
           Although weight is related to mass, it is not the same thing. Weight refers to the force that gravity exerts on an object. This force is directly proportional to the mass of the object. The weight of an object changes as the force of gravity changes, but its mass does not. An astronaut’s mass does not change just because she goes to the moon. But her weight on the moon is only one-sixth her earth-bound weight because the moon’s gravity is only one-sixth that of the earth’s. She may feel “weightless” during her trip when she experiences negligible external forces (gravitational or any other), although she is, of course, never “massless.”

Atoms and Molecules
           An atom is the smallest particle of an element that has the properties of that element and can enter into a chemical combination. Consider the element gold, for example. Imagine cutting a gold nugget in half, then cutting one of the halves in half, and repeating this process until a piece of gold remained that was so small that it could not be cut in half (regardless of how tiny your knife may be). This minimally sized piece of gold is an atom (from the Greek atomos, meaning “indivisible)This atom would no longer be gold if it were divided any further.
It is rare to find collections of individual atoms. Only a few elements, such as the gases helium, neon, and argon, consist of a collection of individual atoms that move about independently of one another. Other elements, such as the gases hydrogen, nitrogen, oxygen, and chlorine, are composed of units that consist of pairs of atoms . One form of the element phosphorus consists of units composed of four phosphorus atoms. The element sulfur exists in various forms, one of which consists of units composed of eight sulfur atoms. These units are called molecules. 
         A molecule consists of two or more atoms joined by strong forces called chemical bonds. The atoms in a molecule move around as a unit, much like the cans of soda in a six-pack or a bunch of keys joined together on a single key ring. A molecule may consist of two or more identical atoms, as in the molecules found in the elements hydrogen, oxygen, and sulfur, or it may consist of two or more different atoms, as in the molecules found in water. Each water molecule is a unit that contains two hydrogen atoms and one oxygen atom. Each glucose molecule is a unit that contains 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms. Like atoms, molecules are incredibly small and light. If an ordinary glass of water were enlarged to the size of the earth, the water molecules inside it would be about the size of golf balls.

 

Classifying Matter

       We can classify matter into several categories. Two broad categories are mixtures and pure substances. A pure substance has a constant composition. All specimens of a pure substance have exactly the same makeup and properties. Any sample of sucrose (table sugar) consists of 42.1% carbon, 6.5% hydrogen, and 51.4% oxygen by mass. Any sample of sucrose also has the same physical properties, such as melting point, color, and sweetness, regardless of the source from which it is isolated.
We can divide pure substances into two classes: elements and compounds. Pure substances that cannot be broken down into simpler substances by chemical changes are called elements. Iron, silver, gold, aluminum, sulfur, oxygen, and copper are familiar examples of the more than 100 known elements, of which about 90 occur naturally on the earth, and two dozen or so have been created in laboratories.
          Pure substances that can be broken down by chemical changes are called compounds. This breakdown may produce either elements or other compounds, or both. Mercury(II) oxide, an orange, crystalline solid, can be broken down by heat into the elements mercury and oxygen . When heated in the absence of air, the compound sucrose is broken down into the element carbon and the compound water. (The initial stage of this process, when the sugar is turning brown, is known as caramelization—this is what imparts the characteristic sweet and nutty flavor to caramel apples, caramelized onions, and caramel). Silver(I) chloride is a white solid that can be broken down into its elements, silver and chlorine, by absorption of light. This property is the basis for the use of this compound in photographic films and photochromic eyeglasses (those with lenses that darken when exposed to light).
         The properties of combined elements are different from those in the free, or uncombined, state. For example, white crystalline sugar (sucrose) is a compound resulting from the chemical combination of the element carbon, which is a black solid in one of its uncombined forms, and the two elements hydrogen and oxygen, which are colorless gases when uncombined. Free sodium, an element that is a soft, shiny, metallic solid, and free chlorine, an element that is a yellow-green gas, combine to form sodium chloride (table salt), a compound that is a white, crystalline solid.
           A mixture is composed of two or more types of matter that can be present in varying amounts and can be separated by physical changes, such as evaporation (you will learn more about this later). A mixture with a composition that varies from point to point is called a heterogeneous mixture. Italian dressing is an example of a heterogeneous mixture . Its composition can vary because we can make it from varying amounts of oil, vinegar, and herbs. It is not the same from point to point throughout the mixture—one drop may be mostly vinegar, whereas a different drop may be mostly oil or herbs because the oil and vinegar separate and the herbs settle. Other examples of heterogeneous mixtures are chocolate chip cookies (we can see the separate bits of chocolate, nuts, and cookie dough) and granite (we can see the quartz, mica, feldspar, and more).
A homogeneous mixture, also called a solution, exhibits a uniform composition and appears visually the same throughout. An example of a solution is a sports drink, consisting of water, sugar, coloring, flavoring, and electrolytes mixed together uniformly.  Each drop of a sports drink tastes the same because each drop contains the same amounts of water, sugar, and other components. Note that the composition of a sports drink can vary—it could be made with somewhat more or less sugar, flavoring, or other components, and still be a sports drink. Other examples of homogeneous mixtures include air, maple syrup, gasoline, and a solution of salt in water.
 
          Although there are just over 100 elements, tens of millions of chemical compounds result from different combinations of these elements. Each compound has a specific composition and possesses definite chemical and physical properties by which we can distinguish it from all other compounds. And, of course, there are innumerable ways to combine elements and compounds to form different mixtures. A summary of how to distinguish between the various major classifications of matter is shown in.

Well THAT'S MY REVIEWS OF CLASSIFICATION OF MATERIALS. THANK YOU TO VISIT HIS WAIT next post . 




18 komentar:

  1. ex I have a glass of 500ml sugar solution. and sugar solution was me for two into 200ml and 300ml. Which is sweeter cup sugar containing 200ml or 300ml glass contains? give the reason, ok thanks

    BalasHapus
    Balasan
    1. ok nina i will try answere your question
      the same, as in a glass of 500ml has been homogeneous and when when a solution on the move does not change the concentration of the sugar solution, despite being divided into 200ml and 300ml

      Hapus
  2. Ferdi, please explain the specific differences of elements and compounds..

    BalasHapus
    Balasan
    1. Differences Elements and Compounds

      Elements are composed of a single type of atom, whereas compounds composed of two or more types of chemical elements.
      The element can not be decomposed into simpler substances by chemical reaction, whereas the compounds can be decomposed into constituent elements by ordinary chemical reaction.
      The element is distinguished by a number atommya while the compound is distinguished by a fixed ratio and the different elements (arranged in the manner specified)
      Elements indicated by symbols such as (H, C, O, Na, etc.) as shown by formulas such as (H20, NaCl, CO2, etc.)
      In the compound mass ratio of constituent elements always remain.
      The compound has a different nature to the nature of its constituent elements.

      Hapus
  3. Hi ferdi, what specific difference between is solid, gas and liquid at classification of matter? thanks.

    BalasHapus
    Balasan
    1. Solid

      Has a specific shape and volume.
      The distance between the particles are very dense solids.
      The particles of solid matter can not move freely

      liquid
      not remain dependent form of the container, has a certain volume.
      the distance between the particles somewhat tenuous
      The particle can move freely

      gas
      do not have a specific shape and volume, depends precisely

      the distance between the particles is very tenuous
      the particles can move very fast

      Hapus
  4. Hi ferdi, How naming rules in the compound?

    BalasHapus
    Balasan
    1. How to name the constituent components based on those compounds? Are all the compounds have been found to have a specific name? In the past, the discovery of compounds named according to origin, for example, named ethanoic acid acetic acid from the vinegar. Increasing number of new compounds were discovered, required an international naming rules applicable. Institutions authorized to formulate the compound in an international nomenclature is The International Union of Pure and Applied Chemistry (IUPAC)

      1.Penamaan Binary Ionic Compounds

      For naming binary ionic compounds are formed from a single metal element and one

      nonmetallic elements, first metal name written without modification and is followed by

      nonmetallic element naming through the provision suffix 'ida'.

      KCl: Potassium chloride

      MgF2: Magnesium fluoride

      KO: Potassium oxide

      Although ionic compounds consisting of positive ions and negative ions but overall

      charged zero. The units of the formula must contain positive ions and negative ions such rupasehingga net charge number: zero. Certain elements may have more than

      an ionic form. To tell the difference formulas and names of the compounds, in this case we determine the oxidation numbers of the elements. There are two common writing system used:

      Naming the writing of oxidation numbers put on the Roman numeral (SYSTEM STOCK).
      Naming system with the suffix 'O' for cations with a lower oxidation number, the suffix 'i' for cations with higher oxidation numbers.

      Example

      Molecular Formula System System Stock Suffix

      CrCl2Kromium (II) chloride Kromo chloride

      CrCl3 Chromium (III) chloride chromic chloride

      Pb2O Plumbum (I) oxide oxide Plumbo

      PbO Plumbum (U) oxide oxide Plumbi

      2. Naming Binary Covalent Compounds

      Naming binary covalent compounds consisting of non-metal element with a non-metallic element, first written element with a positive oxidation number. For example we tuliskanHCl instead of CIH. Naming is done with the initial basis for stating the relative amount of each type of atom in a molecule by using the prefix Award

      mono 1 hepta 7

      The (bis) 2 octa 8

      tri (tris) 3 ona 9

      tetra (tetrakis) 4 deca 10

      penta (pentakis) 5 undeka 11

      hexa (heksakis) 6 dodeka 12

      Prefix within brackets are now rarely used and is more widely used

      in naming the complex compound. So for two main oxides of sulfur can we write

      S02: sulfur dioxide or based on a system of stock: sulfur (IV) oxide

      SO, sulfur trioxide or by the system of stock: sulfur (VI) oxide

      The system can show the relationship between the prefix and the name of the appropriate formula, while the stock system was not always able to show the relationship name and formula.

      Formula Systems StockBCl3 System Prefix Boron trichloride Boron (III) chloride

      Carbon Carbon tetrafluoride CF4 (IV) fluoride

      Carbon monoxide CO Carbon (II) oxide

      N2O3 dinitrogen trioxide Nitrogen (III) oxide

      Sulfor hexafluoride SF6 Sulfor (VI) fluoride

      3. Naming Binary acids

      Adasegolongan binary covalent compounds which under certain circumstances can release

      hydrogen ions (H +) so that the compound is known as an 'acid'. Important binary acids are very limited in number. Its name is based on a combination of the prefix 'hydro' with the name of nonmetallic by the suffix 'at'.

      Example:

      Hydrofluoric acid HF (hydrofluoric acid)

      HBr hydrobromic acid (acid bromate)

      H2S hidrosulforat acid (acid sulfide)

      4. NAMING COMPOUNDS polyatomic

      Polyatomic compounds are compounds that contain polyatomic ions. Ion

      polyatomic consists of two or more atoms bonded together. Polyatomic anion umumnyalebih compared with the kind of cation pliatomik. Elements that are abundant in pliatomik anion is oxygen. Oxygen bound to the metal atom lainnyadisebut not oksoanion .. A certain element forming oksoanion series containing the number of oxygen atoms varies.

      Hapus
  5. Can you explain the difference between the molecular elements and molecular compounds?

    BalasHapus
    Balasan
    1. Differences Elements and Compounds

      Elements are composed of a single type of atom, whereas compounds composed of two or more types of chemical elements.
      The element can not be decomposed into simpler substances by chemical reaction, whereas the compounds can be decomposed into constituent elements by ordinary chemical reaction.
      The element is distinguished by a number atommya while the compound is distinguished by a fixed ratio and the different elements (arranged in the manner specified)
      Elements indicated by symbols such as (H, C, O, Na, etc.) as shown by formulas such as (H20, NaCl, CO2, etc.)
      In the compound mass ratio of constituent elements always remain.
      The compound has a different nature to the nature of its constituent elements

      Hapus
  6. When studying elements, I noticed that anything with an atomic number greater than 92 (Uranium) is called transuranic. These elements are manmade, but is there a difference in any way besides that? How are these elements created?

    BalasHapus
    Balasan
    1. ransuranic element is a chemical element with an atomic number greater than 92 which is the atomic number of uranium. All elements with atomic numbers between 1 to 92 except the four elements (43-technetium, 61-promethium, 85-astatine and 87-francium) can be found in the earth, stable or has a half very long or can be created as a product of uranium decay ,

      All elements with atomic numbers greater than 92 but no plutonium and neptunium are found naturally on Earth. All of these elements are radioactive with a half-life shorter than the age of the earth, so that the atoms of these elements if ever existed on Earth have long decayed.

      Transuranic elements found on earth today is a synthesis through a nuclear reactor or a particle accelerator.

      Hapus
  7. What are the evidences that an atom is composed of electrons, protons and neutrons? how the experts can find these theories?

    BalasHapus
    Balasan
    1. The atom is a basic unit of matter, made up of nuclei and negatively charged electron cloud surrounding it. Atomic nucleus consists of positively charged protons and electrically neutral neutrons (except in the atomic nuclei of hydrogen-1, which has no neutrons). The electrons in an atom bound to the atomic nucleus by the electromagnetic force. As well as a collection of atoms can be bonded to each other, and form a molecule. Atoms are the number of protons and electrons at neutral, while the number of protons and electrons of different positive or negative and is referred to as an ion. Atoms are grouped by the number of protons and neutrons contained in the nucleus. The number of protons in an atom determines the chemical element the atom, and the number of neutrons determines the isotope of the element.

      Hapus
  8. how we can identification some things are compound or mixture when we just look at the physic characteristic of things ?

    BalasHapus
    Balasan
    1. how to identify a compound or a mixture of the physical chemical reaction is to arise odor, discoloration, the formation of sediment, temperature changes

      Hapus
  9. can you to explain about, how the role of dichromate compound in the leather tanning process?

    BalasHapus
    Balasan
    1. Mineral tanning materials that are derived from metal chromium called chromium. The most common mineral tanning using chromium quality is determined by the levels of chromium (usually expressed as chromium oxidation). Chrome tanning method is very different with vegetable tanning method. Similarly the results.

      Chrome tanning skin produces a softer / lemes, and more resistant to extreme heat, the higher its strength and the results will be better when done painting. Because of these properties chrome leather is more suitable to be used as skin superiors. Iron salts produce less good skin color, and easily broken, while the aluminum salts produce white leather.

      Chrome tanning (chrome) is a tannery that began with low pH or acidic conditions, ie between pH 2 to pH 3. Therefore, the skin needs to acidification in order to obtain the desired shape. Old chrome tanning process usually takes between 4 to 8 hours. This is not a benchmark or standard, but it also depends on the thickness of the skin.

      Completed the process of tanning, skin maturity tested gengan boiling water for 2 minutes. If there is a shrinkage of not more than 10%, meaning skin conditions are ripe. An important factor in influencing the physical properties of the tanned leather of which is the raw skin structure. The tensile strength is one factor that needs to consider in assessing the skin becomes.

      Hapus